,

NST Mini Single Temperature Zone Sliding PECVD Tube Furnace

Add to wishlist
Compare
  • Model Number:NST-1200-SlidingPEC
  • Compliance:CE Certified
  • Warranty:Two years limited warranty with lifetime technical support
  • Payment:L/C D/A D/P T/T Western Union
  • Delivery Time:15 day

₹1.00

Compare

Mini single temperature zone sliding PECVD

NST-1200-S-H-PECVD system is composed of TL1200 vacuum tube furnace, quartz vacuum chamber, rf power supply, GX gas supply system, pumping system and vacuum measurement system.

Main features:

1. The gas in quartz vacuum chamber is changed into ionic state by rf power supply.

2. PECVD is lower than normal CVD for chemical vapor deposition.

3. The stress of the deposited films can be controlled by the frequency of rf power supply.

4. PECVD has high deposition rate, good uniformity, consistency and stability than normal CVD.

5. Widely used in the growth of various films, such as SiOx, SiNx, SiOxNy and amorphous silicon (a-si: H), etc.

 

The TMAX1200-S-H-PECVD system technique to the Swedish Kanthal resistance wire heating element, using double shell structure and 30 program temperature control table, phase-shifting trigger, thyristor control, furnace using polycrystalline alumina fiber material, can stainless steel flange seal on both ends of the furnace tube, stainless steel flange installation have a mouth, valve and pressure gauge, vacuum, vacuum degree can reach 10-3 Pa, low temperature field balancing, surface temperature, lift temperature rate, energy saving, price concessions, etc.

model TMAX-1200-SlidingPECVD1 TMAX-1200-SlidingPECVD2
power 1.5kw
Tube size Dia25(OD)X1250mm Dia50(OD)X1250mm
Overall dimensions(LXDXH) 1800X410X610 1800X460X660
The power supply voltage 220 v
Slide rail material 304 stainless steel
Sliding mode stainless steel rolling bearing
Number of phase Single phase
Heating element Import Swedish Canthal A1 resistance wire click into data download
The control mode Using the yu electric program control thermometer (standard)
1. 30 program control temperature intelligent PID adjustment.
2. The heating circuit of the electric furnace can be automatically cut off when it has been protected by warm or broken accidentally. (when the furnace temperature exceeds 1200 degrees or the thermocouple is broken, The ac relay ON the main circuit will be automatically disconnecting, the main circuit is broken, the light ON the panel is out, OFF the light, the limited protective electric furnace.
3. With 485 communication interface (standard and standard for choosing software)
4. It has the function of power failure protection, that is, when the power is off, the program will not start up from the beginning temperature, but the furnace will start to rise when the power is off.
The instrument has the function of temperature self-setting(to replace the imported instrument, we need to pay another fee.)

 

FP93 temperature control table         European instruments           Touchscreen instrument

(SHIMADEN)
The temperature control mode PID
Broken even protection and display Yes
Over temperature protection Yes
Over current protection Yes
Control precision + / – 1 ℃
The trigger Phase shift trigger
Electrical appliances Zhejiang chint
Silicon controlled rectifier 106/16e west gate, Germany
The highest temperature Temperature Zone1: 1200 ℃ temperature zone 2:1200 ℃
The rated temperature Temperature Zone1: 1100 ℃ temperature zone 2:1100 ℃
Heating rate The 20 ℃ / Min or less (can modify according to the requirement)
Recommended heating rate 10 ℃ / Min or less
Model of thermocouple Zones 1: temperature range of K type 2: K type
Heating length Zones 1: temperature range of 200 mm. 2:200 mm
Electrical certification CE
Surrounding surface temperature 45 ℃ or less
Rf power supply  (plasma generator)
Power output range 0-500 w
Maximum reflected power 200 w.
Working frequency Rf: 13.56 MHZ plus or minus 0.005%
Power stability + / – 0.1%
Harmonic component – 50 or less DBC
Rf width 0-600 – mm is adjustable
Matching mode automatic
Cooling mode Air cold
noise The < 50 db
The radio frequency interface 50 Ω N – type
Input power 208-240 – v 50/60 hz
Main parameters of GX gas supply system mass flowmeter
The standard range
Using the proton flow controller 5, 10, 20, 30, 50, 100, 200, 300, 500 SCCM, 1, 2, 3, 5, 10 SLM
(you can choose the range of the range and the type of the gas)
Maximum working pressure 3 mp
The accuracy of Plus or minus 1.5%
The pressure drop < 0.01 mpa < p = “” >
Repeat accuracy Plus or minus 0.2% F.S
Channles: 1, 2, 3, 4, 5, 6, 7, 8 (optional )
Joint type Double cassette stainless steel connector
System work pressure range 0.1 ~ 0.5 MPa
Working temperature 5-45 ℃
Pressure vacuum watch 0.1 ~ 0.15 MPa to 0.01 MPa/case
Static mixing chamber Dia50 X 400 mm
interface Dia6 1/4″
The power supply 220 v
size 600 x600x600
Corrugated pipe KF25X1000mm
The vacuum degree can be reached with this system 10-1 the pa
Vacuum baffle valve KF25
VRD to 8 vacuum pump
model VRD to 8
Limiting partial pressure 5 x10-2 Pa
Inlet exhaust interface KF25
Motor speed 1440 RPM
Extraction rate 2.2 L/S
Motor power 0.4 KW
Perfeer ACP1 Oil-free multi-stage roots pump (plan 2)
Model ACP15
Power supply AC100 ~ 240V 50/60hz
Power 450 w
Exhaust interface KF25
Weight 25 kg
The maximum helium leakage rate is 5 · 10-8 Pa m3 / s
Extreme vacuum degree 0.02 Torr
The extraction rate is 14 m3 / h
model ZDR – 1
power 25 w.
Vacuum degree measurement range 0.1-10 5 Pa
Resistance silicon What ZJ had to 52 t
Sweden (INFICON) Pirani capacitance vacuum meter (optional)
model PCG554
Input voltage 24V 1A DC (equipped with 220V transformer)
Vacuum gauge interface KF16
Digital display Digital display (screen size 20x14mm), whose data display unit is torr
Product size 46mm x 28mm x 126mm (L x W x H)
The weight of the 5 LBS
Detection of gas Various gases can be detected including mixed gases, accurate and repeatable.
Whether the anti-corrosion Corrosion protection
The response time 30 ms or less
Measuring range 3.8 x10-5-1125 Torr.
Molecular pump unit (optional)
Unit input voltage 380 v / 220 v
Corrugated pipe KF40X1000
Vacuum baffle valve KF40
Case size 600 x600x600
Molecular pump
Molecular pump model FJ620
Input voltage 380 v
Molecular pump inlet flange DN160
Molecular pump pumping rate L/S (for air) 600
Molecular pump limit pressure (Pa) 6 x 10-7
Cooling system Water cooled
Cooling water pressure (MPa) 0.1 to 0.2
Cooling water temperature < 25 ℃ < p = “” >
The environment temperature 0 ~ 40 ℃
Suggested starting pressure < 100 pa < p = “” >
Engine vacuum pump RVP – 6
power 0.75 KW
voltage 380 v
speed 1450 RPM
Inlet diameter KF25 / KF40
Pump pumping rate (L/S) 6
Ultimate pressure 4 x10-2 pa
German Pfeiffer vacuum pump
voltage 220 v
power 110 w.
Extraction interface KF40
The weight of the 150 kg
Pump speed of the front pump 0.9 m 3 / h
Extraction rate (N2) 33 m/S
Compound vacuum gauge
Compound vacuum gauge model ZDF
The power supply 220 v 55 w
Control precision Plus or minus 1%
Vacuum gauge measurement range 10-5-10 5 Pa
Categories: ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “NST Mini Single Temperature Zone Sliding PECVD Tube Furnace”

There are no reviews yet.

Related products