Compare
TECHNICAL PARAMETER
NST-MP20-2B grinding/polishing machine is equipped with 8″ lapping plate and can be used as a standard manual grinder, or lapping/polishing machine for two pieces flat sample and metallographic samples at the same time. It is the most cost effective solution for the material research lab to prepare metallographic samples and failure analysis
| Model No. | NST0-20-2B |
| Polishing pad diameter | Φ200mm each |
| Polishing rotating speed | 50-1000r/min, stepless adjustable |
| Motor | Two 550w high torque DC motor |
| Input power | 550w |
| Input voltage | AC 220V 50Hz |
| Outer dimension | 725*710*310mm |
| Gross weight | 50Kg |
NST-EQ-UNIPOL-802 machine is equipped with 8″ super flat lapping plate and can be used as a high precision lapping machine for polishing crystal components, semiconductor wafers, and ceramic substrates up to 3″ in diameter. It can be used as a standard grinding and polishing machine for preparing metallographic samples as well. Combining with flat sample holder (included).
The ultra-high pressure cold isostatic press is to place the sample product in a closed container filled with liquid. After the power is applied, the pressure applied by the liquid on each surface of the sample is equal. In a high-pressure environment, the density of the sample product becomes large, the gap of the sample particles becomes smaller and the desired shape is obtained.
NST-EQ-UNIPOL-1210 grinding/polishing machine is equipped with 12″ lapping plate and can be used as a standard manual grinder, or lapping/polishing machine for both of flat sample and metallographic samples. It is the most cost effective solution for the material research lab to prepare metallographic samples and failure analysis.
NST High Temperture 1200C Single Zone Rotating Tube Furnace 
Mini Vise for 150 low Speed Saw 
Ultra high pressure cold isostatic press NST-500CIP-50MAF 
There are no reviews yet.