NST Single-Zone 1200°C
This is a video link to our product.
TMAX-1200Cfurnace split tube furnaces feature the famous Kanthal (Sweden) spiral wire coils embedded in Mitsubishi (Japan) high quality grade 1500 alumina fiber insulation. A double walled steel internal housing helps minimize heat loss to exterior urface.
Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.
1 Compact, portable and lightweight design.
2 Split furnace chamber for fast and easy tube access.
3 Standard package includes set of stainless steel vacuum sealing flanges with valves and pressure meter.
4 Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.
5 Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.)
6 Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
7 Built-in computer interface.
8 Long life type K thermocouple.
1 Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller’s manual) or when the thermocouple is broken or malfunctions.
2 Power failure protection resumes furnace operation right after the point of failure when power is reestablished.
Warning! NEVER fill furnace with explosive gases, including Hydrogen, Carbon Monoxide and Methane.
|Electrical requirements||110-240VAC, 50/60 Hz, single phase|
|Maximum working temperature||1200°C|
|Maximum constant working temperature||1100°C|
|Constant working temperature under vacuum||1000°C|
|Minimum working temperature||Ambient|
|Rated vacuum pressure||0.001 Pa / 0.0075 millitorr / 0.00001 mbar|
|Rated positive pressure||0.02 MPa / 150 torr / 3 psi|
|Heating element type||Kanthal (Sweden) resistance coil wire|
|Refractory lining||Mitsubishi (Japan) high quality 1500 grade fiber alumina|
|Temperature controller|| Shimaden (Japan) fp93 (made in Japan) with 4 programs and
40 segments (ie. 4 x 10 segments or 2 x 20 segments).
|Maximum heating & cooling rate||< 30°C / min|
|Heating zone length||16 inches|
|Constant temperature zone length||10 inches|
|Temperature controller precision||+/- 1°C|
|Vacuum sealing flange kit|| Stainless steel vacuum sealing flanges with one vacuum gauge,
two valves and four thermal ceramic blocks.
|Gas inlet/outlet||1/4″ hose barb with 1/4″ BSPT (British Standard Pipe Thread)|