SYJ-150-BC is a dual diamond low-speed saw designed for cutting two ends of cylindrical cell and take out core for failure analysis, which equips with the advanced digital micrometer and digital speed display controller, it is the perfect tool for cutting/dicing/slicing cylindrical batteries up to 3 2O.D. without damage of cell.
SPECIFICATIONS:
| Voltage and Power |
- AC 110V/220V switchable for worldwide usage
- 110VDC Motor
- 8Amp fuse installed
|
| Speed Range |
Variable 0-600 rpm with LED digital display |
|
Cutting Width & Depth
|
- The cutting width of the slice is controllable from 1mm ~ 24mm by adjusting the LCD digital micrometer. The LCD micrometer is waterproof with a resolution of 0.001 mm and accuracy of +/-0.003 mm.
- 32.5mm max. cutting depth (when using 35mm Dia. blade flange) Please click the pic below to know the cutting depth
  
|
| Diamond Blades |
- Three blades are included for cutting various materials
- one 62 mm L spacer is included for cutting 18650 and 26650 cylindral ceel
- 66 mm spacer is available upon request for 21700 cell.
- Full sintered diamond blade: 4″ x 0.35 mm x 0.5″ arbor for cutting crystal, ceramic, and plastic materials
|
Sample Holder & Mini-vise
 |
- Two angles adjustable sample holder is included, please click picture below for the details (max. opening 26mm)
- One Mini-vise is included, which can be easily adapted onto the sample holder to clamp rod shape specimens with a diameter up to 32mm max.
  
|
| Package Dimensions |
 19″(L) x 15″(W) x 15″(H) (click to enlarge the picture) |
| Balancing Weights |
Front (SYJ150-03): 0.75 lbs
Back (SYJ150-02): 0.55 lbs |
| Shipping Weight & Dimension |
32 lbs, 18″ x 14″ x 14″ |
| Warranty |
Two years limited with lifetime support (not including rusted parts due to inadequate storage conditions) |
| Certification |
- CE Certified.
- NRTL or CSA certificatin is available upon request
|
| Application Notes
|
- This saw is Designed for cutting cylinder cells for failure analysis.
- Must use anti-corrosion coolant during cutting to avoid rusting the lead screw. Please never use water as the coolant during cutting. You may select our LubeCool-150 lubricant as a coolant which will make diamond blade cut more efficiently and prevents corrosion. Also, you can use W10-30 motor oil as a coolant, which is available at any Auto store.
- Please clean the machine after the completion of each use, especially the lead screw using WD-40 lubricant (1 can include) after each use. Make sure the X, Y, and Z axes can move freely without blocking and rusting.
- Click here to Learn how to mount/align sample
- Applications on various materials
- Using spacers to make gang saw, you may section multi-sample in one time ( click pic left to learn how )
|
| Warning |
- It is required to use proper cutting fluid with the saw to prevent corrosion of the machine components. We strongly recommend you use oil based coolant or lube cool lubricant with the water. Please Do not use tap water directly, the rust component is not part of the warranty.
- Never cut any materials without the use of proper cutting fluid. If you do so, serious damages can be caused by the spooler driving mechanism.
- For cutting the sticky materials such as non-ferrous alloy, epoxy, and plastic, you must sharpen diamond blade frequently. We suggest that cutting sample along with the included dressing stone (Glue sample and the dressing stone side by side and cut them together, this process will help keep the blade sharp enough for efficient cutting.
- The saw can be used inside a glovebox with N2 gas, but no Ar gas, please.
|
| Operation Instruction |
   |
19″(L) x 15″(W) x 15″(H) (click to enlarge the picture)
There are no reviews yet.