Heavy Duty High Speed Abrasive Cut-off Saw with Two 10″ SiC Cutting Blades – NST-30

SYJ-30 (originally  EQ-MT-200)  is CE certified heavy duty bench top wet abrasive cut-off saw. It is designed to cut metallographic samples faster and safer at an affordable price. The 10″ SiC or diamond cutting blade is used for cutting all kinds of materials with a maximum sample size of 30 mm x 30 mm. A cooling system is built in to avoid overheating sample or splashing water during cutting.

SPECIFICATION:

Input Power	208 – 240V AC single phase  （ 50、60Hz ） (110V version is available with a 1500W transformer ）
Motor Power	AC Motor with 1.1 KW
Motor Speed	2800 RPM
Cutting Blade	Two 10″ OD x 1.25″ ( I.D) x 2 mm (Thick) SiC cutting blade included. Click the picture below to order spare blades
Max. Cutting Section	30 mm x 30 mm
Mount Vise	The t-clamp vise is included for quick tightening or release
Driving the Cut	Manually push up. It is safer and faster than to push down along the cut-off saw.
Cooling system	May use Tap water as a coolant, inlet flow is adjustable in the front panel, and outlet flow is adjustable at the bottom of the machine. Must clean the machine after cutting to avoid corrosion. May use Heavy Duty Coolant Circulating Tank with Pump, 4L with anti-corrosion LubeCool-150 lubricant as the coolant to recirculate coolant ( Please click underlined or picture below to order at extra cost )
Machine Dimensions	650 x 450 x  400 mm
Net Weight	60Kg ( 132 Lb)
Shipping dimensions	45″ x 35″ x 30″
Shipping weight	160 lbs
Warranty	One Year limited warranty and lifetime support, not including blade and rusted parts due to inadequate storage conditions.
Certification	CE certified. With additional certification fee, MTI can arrange NRTL to perform UL/CSA inspection and label the machine per customer’s request.
Application Notes	How to change cutting blade How to mount the sample Water inlet & drain pipe Please use anti-corrosion coolant during cutting to avoid rusting the lead screw. Not suggest using water as a coolant during cutting. You may select our LubeCool-150 lubricant as a coolant, and build up a small circulation system with Heavy Duty Coolant Circulating Tank with Pump, which will make diamond blade cut more efficient and keep the machine from corrosion. Also, you can use W10-30 motor oil as a coolant, which is available at any Auto store. Always clean machine, especially the lead screw using W40 lubricant after each use.