NST-27L – 512L 200°C Vacuum Oven with Digital Temperature Controller & inner Chamber
NST-BE-ZK is a middle size vacuum oven with max working temperature 200°C and 27 – 512 Liter capacity. The oven adopts heat radiant wall system providing optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.
SPECIFICATIONS:
Model | BE-ZK-27L | BE-ZK-64L | BE-ZK-125L | BE-ZK-216L | BE-ZK-512L |
The inner Chamber size(W*H*D mm) | 300*300
*300 |
400*400
*400 |
500*500
*500 |
600*600
*600 |
800*800
*800 |
Dimensions(W*H*D mm) | 600*470
*710 |
700*570
*810 |
800*670
*910 |
900*870
*1010 |
1100*1070
*1210 |
Net Weight | 90KG | 110KG | 130KG | 150KG | 200KG |
Input Power | 3.0KW | 4.0KW | 6.0KW | 8.0KW | 10.0KW |
Working Voltage | AC 220V 50HZ | AC 380V 50HZ | |||
Working Temperature | RT+10 ~ 200°C for the continuous use | ||||
Chamber and Door | 1. The chamber is structured with stainless steel and welded to bracing pieces. 2. A good vacuum sealing is achieved by the silicone gasket and the positive latch door. 3. The double layers observation window consists of 1/2″ tempered glass and transparent polycarbonate shield. 4. Two stainless steel shelves are included to facilitate processing efficiency. |
||||
Interior material | Stainless Steel 304 (6mm thick) | ||||
Exterior material | Cold rolled steel plate (1.5mm thick) | ||||
Temperature Controller | 1. Single point temperature setting 2. Built-in over-temperature protection 3. PID precise temperature control 4. Temperature control accuracy: +/-0.1°C 5. Temperature uniformity: +/-5°C @ 100°C, 25″ Hg at center 6″x6″ area only |
||||
Fittings | This oven comes with a KF-25 vacuum connector which allows you set up a quick connection to the vacuum pump. | ||||
Compliance | CE Certified | ||||
Warranty | One years limited warranty with lifetime technical support | ||||
Vacuum Pump (optional) | Vacuum level displayed on gauges from -0.0116 ~ 0 Mpa (atmospheric pressure).Vacuum pump is not included. | ||||
Attention | 1. It’s normal that the SS chamber wall will slightly deform and loose its shine during high-temperature operation. However, this would not affect any functionality.
2. Please do not place the sample on the chamber bottom directly. |
There are no reviews yet.