Precision Disc Cutter with Standard 16, 19, 20 Dia. Cutting Die & 3 – 24mm Optional – NST-T-10


Available on backorder


Available on backorder


MSK-T-10 is a compact disc cutter with quality sliding rail with ball bearing for precision cutting. It can be easily placed into a glove box with a transition chamber diameter larger than 230mm. This tool is manually operated and is designed for cutting round discs from a thin metal sheet/foil (< 0.5 mm) or separator film (<30um).  The resulting discs can be used as electrode/separator discs of the split test cell and coin cell for battery researchers as well as TEM sample preparation.



Major structural material: Cr Plated Steel

Cutting Die
  • 16, 19, and 20mm precision dies are included in the standard package
  • Optional 3 – 24mm customized dies are available upon request at $599.00/each, 4-6 weeks lead time
Max. Stroke length
  • 17mm
Product Dimensions
  • 209mm(L) x 120mm(W) x 394mm(H)
  • Compact size which can be put into glovebox through airlock chamber
  • One year limited manufacturer warranty with lifetime support.
  • Rusting and damage due to improper storage condition or maintenance are not covered by warranty.
  • With additional certification fee, MTI can arrange NRTL to perform UL/CSA inspection and label the machine per customer’s request.
Operation Manual
           Installation Instruction
Application Notes
  • If you are going to make CR2016, CR2025 or/and CR2032 coin cell batteries, you will need at least three cutting dies:
    • 16mm (for negative side case, which is 16.5mm in diameter)
    • 19mm (for positive side case, which is 20mm in diameter)
    • 20 mm (for the separator to fully separate the electrodes in both negative and positive cases)
  • For CR2450 coin cells, a 20mm cutting die can be used for cutting electrode discs and the 24mm cutting die can be used for cutting either electrode discs or separator discs (the 24mm cutting die can be purchased as optional die)
  • Separator discs must be large enough to fully separate the positive and negative electrodes to avoid short-circuit inside the coin cells
  • Warning: You must pay great attention to install die or change die from one size to another. The tolerance of precision die is very little. Please contact us if you have any question.
  • Misalignment will result in die damage. Please read the operation manual and watch instruction video carefully when changing die.  MTI is not responsible for the damage caused by misoperation.  Strongly suggest with buy the several cutters with pre-installed die
Net Weight 10 kg (22 lbs)

Based on 0 reviews

0.0 overall

Be the first to review “Precision Disc Cutter with Standard 16, 19, 20 Dia. Cutting Die & 3 – 24mm Optional – NST-T-10”

There are no reviews yet.