-9%

Precision Wire Saw with Sample Stage and Diamond Wire – 24″ Dia Cutting Capability – NST-2401

Availability:

Available on backorder


2,550,000.00 2,800,000.00

Available on backorder

Compare

STX-2401 is a CE certified  precision diamond wire saw.  It is designed to provide smooth cutting or slicing for all kinds of materials (especially for larger size crystals, such as Si, CaF, glass, and sapphire, etc.) with boule diameter up to 24″ (600 mm).  It cuts the crystal by a diamond impregnated wire (0.28 mm diameter) which moves back and forth repeatedly with the help of a digital controller. STX-2401 is equipped with an angle-adjustable sample holder.

SPECIFICATION

Power Supply AC220 V, 50/60 Hz, 300W (110V is available with a transformer)
Cutting Speed
(Feed Speed)
Highest feeding speed:    40  mm/min
Lowest feeding speed:     0.01 mm/min
Back Speed 1~100mm/min adjustable
Wire Moving Speed 0 – 4 Meter/ second variable
Controller 6″ color LCD touch screen control panel allows you to set the program to control the Moving Speed of the diamond wire, feeding speed of the sample stage, the slicing thickness, and coolant pump operation.
Sample Stage The sample stage can move in the X-axis and rotate towards two directions (clockwise and counter-clockwise) for precision orientation. Max. Load Capacity: 600KG
Diamond wire Ø 0.28mm x  65m Length
Traveling Distance 600mm  (±0.01mm accuracy, both Z and Y axis)
Cutting Area Ø600mm × 600mm
Wire Tension Built-in pneumatic valves can easily adjust the tension of cutting wire. (air pump with >20 PSI pressure is required, but not included)
Cooling Circulating water/coolant system by two water pumps (included)
Meteorite Sample
  • Please click the picture below to view the meteorite samples that were cut by our wire saws.
Product Dimensions Wire saw: 1454 X1404 X 2490mm, Controller: 520mm x 40mm x 250mm
Warranty Two years limited, not include the diamond wire and rusty parts
Certification CE Certified. With additional certification fee, MTI can arrange NRTL to perform UL/CSA inspection and label the machine per customer’s request.
Warnings
  • It is required to use proper cutting fluid with the saw to prevent corrosion of the machine components. We strongly recommend you use oil based coolant or lube cool lubricant with the water. Do not use tap water directly, rusted component is not part of the warranty.
  • Never cut any materials without the use of proper cutting fluid. If you do so, serious damages can be caused to the spooler driving mechanism. 
  • For cutting the sticky materials such as non-ferrous alloy, epoxy, and plastic, you must sharpen diamond wire frequently. We suggest that cutting sample along with the included dressing stone (Glue sample and the dressing stone side by side and cut them together, this process will help keep the wire sharp enough for efficient cutting.  
  • Please clean the machine after the completion of each use.
Optional
    • The diamond wire saw with Max. Cutting diameter 1000 mm is available now. as the picture below, please contact our engineering if you have any need

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Precision Wire Saw with Sample Stage and Diamond Wire – 24″ Dia Cutting Capability – NST-2401”

There are no reviews yet.