NST-5L Plasma Cleaner
Featrues
1. Environmental technologies: plasma process is the role of gas – solid coherent reactor consumes no water resources, no need to add chemicals and no environmental pollution.
2. Wide adaptability: regardless of processing substrate type, such as metals, semiconductors, oxides, and most.
₹650,000.00 ₹715,000.00
Technical parmaters
| Power supply: | AC220V |
| Working current: | Total working current not higher than1.2A (Not include the vacuum pump) |
| RF Power: | 200W |
| Radio frequency: | 13.56MKHZ(offset less than 0.2Hz) |
| Frequency offset | Less than 0.2KHz |
| Characteristic impedance: | 50 Ohm,Automatic matching |
| Vacuum degree: | 30Pa—100Pa |
| Gas flow: | 10—100ml/min(Adjustable) |
| Process Control: | MCU Automatic and manual mode |
| Cleaning time: | 1-6000 secds adjustable |
| Power supply: | 10%-100% Adjustable |
| Inside chamber size | 150mm×270mm |
| Outside dimension: | 480*390*350mm |
| Weight: | 45Kg |
| Vacuum chamber temperature | Less than 65°C |
| Cooling type: | Forced cooling |
Application
1.Car industry: ignition coil engine oil seal film
2.Defense industry: Aerospace electrical connectors,Kevlar deal
3.Electronics industry: hard plastic parts, earphone, Cell phone cover
4.Medical industry: intravenous infusion, catheter treatment
5.Textile fiber,rubber and plastic industry and etc.
Based on 0 reviews
Be the first to review “NST-5L Plasma Cleaner”
Related products
-
Oxygen Plasma Cleaners
NST-Atmospheric low temperature plasma cleaner
Atmospheric low temperature plasma cleaner acts on the surface of the solid sample, which not only removes the original contaminants and impurities, but also produces an etching effect, which roughens the surface of the sample and forms many fine pits, increasing the ratio of the sample. Surface, improve the wetting properties of the solid surface.
SKU: n/a -
Oxygen Plasma Cleaners
NST board plasma cleaning machine
The NST board plasma cleaning machine can be processed online at high speed to improve production efficiency. The characteristics of the plasma are used to clean, activate and activate the surface of the solid material to be treated, thereby realizing the purpose of changing the surface microstructure, chemical properties and energy.
SKU: n/a -
Oxygen Plasma Cleaners
NST-Glass optical plasma cleaner
Glass optical plasma cleaner is an important material surface modification method, which can be applied to the field of glass optics. The processing temperature can be as low as 80℃ and below 50℃. The low processing temperature can ensure no thermal influence on the sample surface.
SKU: n/a -
Oxygen Plasma Cleaners
Lab compact UV-ozone cleaner with 6″×6″ chamber
Lab compact UV-ozone cleaner is a compact Ultraviolet (UV) Ozone cleaner, which is a dedicated system to remove a variety of contaminants from surfaces of substrates samples. UV Ozone cleaning is a simple to use dry process which is highly effective method to clean surfaces.
SKU: n/a -
Oxygen Plasma Cleaners
NST Oxygen Plasma Cleaner
Featrues
1. Environmental technologies: plasma process is the role of gas – solid coherent reactor consumes no water resources, no need to add chemicals and no environmental pollution.
2. Wide adaptability: regardless of processing substrate type, such as metals, semiconductors, oxides.
SKU: n/a
There are no reviews yet.