NST 1700°C Vacuum Chamber Atmosphere Furnace
Vacuum chamber atmosphere furnace for silicon carbide heating elements, USES the three layers of shell structure and the Japanese island of 40 program temperature control system, electric phase-shifting trigger, thyristor control, furnace using polycrystal line alumina fiber materials imported from Japan, equipped with air cooling system between internal and external bile, can rapid cooling.
Using shell overall sealing cover board and the oven door seal adopts high temperature silicone o-rings, oven door is equipped with water cooling system, gas after flowmeter by the breech, after furnace, gas outlet valve discharge by the door of the oven.
The furnace can be sintered in a vacuum. The furnace has a quick connector with KF25 on the side, which can be connected with vacuum pumps. The vacuum pump has a smoke filter and a suction nozzle with a dust filter.
With corrugated pipe, vacuum pump (connected to the furnace and vacuum tube), KF25 quick card sets, vacuum flapper valve, resistance vacuum gauge, etc., whereas the minimum vacuum degree is less than 5 pa, can also be hydrogen and argon, nitrogen, oxygen, carbon monoxide, protective gas such as ammonia decomposition gas, &energy-saving small size, low temperature field balancing, surface temperature and elevating temperature rate, energy saving, universities, research institutes, industrial and mining enterprises do protect the sintering atmosphere, reducing atmosphere with the ideal product.
The sealing of the furnace is made of glove box technology. The sealing effect is very good. It can be used in a vacuum or atmosphere, and it can ensure that the pressure gauge is not deflected within 5 hours.
1. Heating element
(1) the hot end roughness d of the silicon carbon rod is 14mm, the average factory adopts 12MM, the heating end is thick, the surface load of the rod is low, and the service life is long.
(2) the length of the cold end of m is 210mm. The average manufacturer adopts 180mm, and the cold end has a low temperature.
(3) the surface oxidation of the silicon carbide rod is compact and can better protect the carbon rod.
2. Install air switches and leakage protectors:
3. Can connect with computer (Optional)
Furnace with communication interface and software, can be directly through the furnace computer control of each parameter, and can be observed from the computer PV on the stove and SV temperature and the running situation, the actual temperature of the furnace curve drawing computer real time, and can keep the temperature data of each time, can call up at any time.
Item No. | NST-1700Chamberfurnace | NST-1700Chamberfurnace |
Power | 7KW | 13KW |
Chamber size(mm) | 300X200X200 | 400X300X300 |
Overall meas.(mm) | 600X610X 1440 | 700X 700X1540 |
Voltage | 220V | 380V |
Phase | Single | Single |
Heating element | Mosi2 | |
Temperature controller | 40 programmable segments (Shimaden fp93 made in Japan),
It can separate into 4,2,1 programs, ie. 4×10 segments. FP93 have 6 PID controls, different PID are used for low,middle, high temperature for precise control. Over-temperature and over-current protection, shutdown automatically when thermocouple is broken ( it will shut down power when temperature is higher than 1620⁰or thermocouples is broken, “ON” on the board is off and “OFF” is on) There is Fahrenheit (F) and Celsius (C) for option. With 485 communication interface: which can stop the furnace automatically. |
|
Chamber | 1800 Polycrystalline alumina fibre. Imported from Japan | |
Temperature Accuracy | +/- 1 ℃ | |
Trigger | Phase-shift trigger | |
Power control | Chint | |
Controlled silicon | Germany Semikron 106/16E | |
Max. Temperature | 1700 ℃ | |
Constant temperature | 1650 ℃ | |
Max. Vacuum Temperature | 1500℃ | |
Vacuum level in cold | ≤10Pa | |
Heating Rate | ≤20 ℃/ Min | |
Recommended Heating Rate | ≤10 ℃/ Min | |
Thermocouple | Type B | |
Surface temperature | ≤45℃ | |
Vacuum pump |
VRD-16 |
|
Air switch | ||
Certificate | CE |
There are no reviews yet.