Product Carousel Tabs
Zunhua Sash BOMB series Bias power supply
Bomb-IIIS series of Bias power supply works in high frequency conversion mode of Level 2，unipolar pulse output .Power supply voltage is adjusted by changing the voltage of the power supply of high frequency transformation circuit to realize, adjustable voltage circuit with1% stable rate.
ZJ-54D Metal thermocouple vacuum gauge tube
This type of vacuum gauge adopted smaller thermal capacity nickel chromium – constantan as a heating wire and thermocouple wire with stabilizing treatment. With automatic enviroment temperature compensation and dust protection, has a simple structure, wide range, fast response, anti-pollution, anti-oxidation, small drift, long life, stable performance,reasonble price and so on. Especially for low vacuum measurement. This type of vacuum guage can be used with the ZJ-53 glass thermocouple regulated interchangeable.
ZJ-27 thermal vacuum gauge tube for vacuum PVD machine/ZJ-27 CF35 /KF40 gauge tube
ZJ-27 thermal vacuum gauge tube for vacuum PVD machine/ZJ-27 CF35 /KF40 gauge tube
This type of regulation is a typical transistor structure, adopts precious metal oxide cathode, with the features of antioxidant, instantaneous atmospheric impact resistant, stable performance, long life, suitable for medium and high vacuum measurements, etc.
ZDF-III-LED composite vacuum gauge
·Power: about 40W at the maximum.
vacuum metalizng machine Magnetic valve
Holding pump Magnetic valve :size:115*115 mm suitable for 2X-30 rotary vane pump
Backing pump Magnetic valve: size:160mm * 140mm*140mm suitabel for 2X-70 rotary vane pump
Model: DN16;DN25;DN32.DN40;DN50;DN65;DN80;DN100
Vacuum arc Melting Furnace NST-AM180-V7X
This product is a small vacuum arc melting furnace with tungsten electrodes and water-cooled copper crucible. The equipment melting temperature can exceed 3000℃, and the temperature is reduced rapidly. The equipment adopts stainless steel water-cooled chamber and is equipped with a quartz observation window
Small vacuum induction furnace NST-IM315-S
This product is a small vacuum induction furnace with induction heating, and the melting temperature of the equipment can reach 2000℃. The induction furnace adopts a stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition.
Ultra high pressure cold isostatic press NST-500CIP-60MAF
Ultra high pressure cold isostatic press NST-500CIP-60MAF
The CY-500CIP-60MAF ultra-high pressure cold isostatic press is designed for the material research department of colleges and universities and scientific research institutes that need small pieces of analytical samples. It has the characteristics of small size, reliable operation and simple operation.
Ultra high pressure cold isostatic press NST-500CIP-30MAF
Ultra high pressure cold isostatic press NST-500CIP-30MAF
The ultra-high pressure cold isostatic press is to place the sample product in a closed container filled with liquid. After the power is applied, the pressure applied by the liquid on each surface of the sample is equal. In a high-pressure environment, the density of the sample product becomes large, the gap of the sample particles becomes smaller and the desired shape is obtained.
Ultra high pressure cold isostatic press NST-500CIP-50MAF
Ultra high pressure cold isostatic press NST-500CIP-50MAF
The CY-500CIP-50MAF ultra-high pressure cold isostatic press is designed for the material research department of colleges and universities and scientific research institutes that need small pieces of analytical samples. It has the characteristics of small size, reliable operation and simple operation.
NST-HFV-K Series Diffusion Pump Oil
HFV-K series diffusion pump oil has a low ultimate pressure at work, high pumping speed and good oxidation resistance. Can be widely used in optics, electronics, vacuum metallurgy, vacuum coating and other aspects of the defense industry for metal diffusion pump and glass diffusion pump.
Professional Compact Turbo Pump Station (Oil Or Dry Backup Pump Optional)- NST-80
Professional Compact Turbo Pump Station (Oil Or Dry Backup Pump Optional)- NST-80
Pump station NST-80, Compact oil or dry backup pump optional
The turbo pumping station is a piece of clean high (ultrahigh) obtaining equipment, and it is a vacuum obtaining system mainly consists of a molecular pump and a mechanical pump according to vacuum knowledge and principle. The products in this Specification include FJ-80, turbo pumping station, with corresponding pumping speed of 62L/s. The pumping speeds of the backing oil pumps are 0.5L/s, and the pump speeds of the backing dry pumps are 0.2L. These products are widely applied to the fields of surface analysis, accelerator technology, plasma technology, research laboratories, electric vacuum device manufacturing and other vacuum areas.
300W/500W 5L Oxygen Plasma Cleaner NST-P5L-300W
5L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
1000W 10L Plasma Pleaner NST-P10L-1000W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.
300W / 500W 10L Oxygen Plasma Cleaner NST-P10L-300W/500W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
100W/150W 10L Plasma Cleaner NST-P10L-100W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
Dual-Target Magnetron Sputtering Coater NST-MSP300S-RFDC
Dual-target magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. There are 1-inch or 2-inch magnetron targets for you to choose. Customers can choose the target according to the size of the substrate to be coated
NST-10L 13.56MHz Plasma Cleaner
Featrues
1. Environmental technologies: plasma process is the role of gas – solid coherent reactor consumes no water resources, no need to add chemicals and no environmental pollution.
2. Wide adaptability: regardless of processing substrate type, such as metals, semiconductors.
NST Precision Temperature Controlled Hi-Vacuum Thermal
Precision temperature controlled hi-vacuum thermal evaporating coater is suitable for coating most of metallic and organic materials film up to 2″ size from 200 ºC to 1500 ºC (or 200 ºC – 1700 ºC with an optional B-type thermocouple). A rotatable sample holder is built in to allow uniform film coating.
NST Mechanical Vacuum Booster pump
The NST pumps are positive displacement roots vacuum pumps. The pump bearings, gears and seals are lubricated by oil fed from oil reservoirs at either ends of the roots pump. A series of seals stops the oil from reaching the vacuum side of the pump. Roots pumps helps in shifting the operating pressure to a high vacuum range due to rotation of gear timed rotors in opposite directions. Roots vacuum pumps are capable of improving the attainable ultimate pressure of a pump system by a factor of 10.
NST-1700°C Vacuum Atmosphere Stirring Elevator Lifting Furnace
NST Small Roll To Roll Battery Electrode Continuous Coating Machine
NST Small Roll To Roll Battery Electrode Continuous Coating Machine
Anti-Corrosion Spin Coater ( 8000 RPM & 6″ Wafer Max.) With Complete Accessories
Anti-Corrosion Spin Coater ( 8000 RPM & 6″ Wafer Max.) With Complete Accessories
100W/150W 5L plasma cleaner NST-P5L-100W
100W/150W 5L plasma cleaner NST-P5L-100W
5L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.
KF-10 CENTERING RING with Viton O-RING
KF VACUUM FITTINGS AND FLANGES
KF vacuum fittings and flanges consist of two flanges coupled together by a centering ring with a O-ring and a clamp. With this kind of connection provides many advantages, such as easy and quick mounting, assembly without any tools, unlimited orientation and easy interchangeability.
The standard sizes for KF vacuum fittings and flanges are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50.
KF vacuum fittings and flanges are includes KF clamp, KF claw clamp, KF centering ring, KF o-ring, KF blank flange, KF bored weld flange, KF socket weld flange, KF half nipple, KF full nipple, KF reducing conical, KF elbows, KF tees, KF 4-way crosses, KF reducing tees, KF reducing 4-way crosses, KF flange to hose nozzle and so on.
Three targets NST magnetron sputtering coater NST-MSP300S-3NST
Three targets NST magnetron sputtering coater NST-MSP300S-3NST
Three targets NST magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. There are 1-inch or 2-inch magnetron targets for you to choose. Customers can choose the target according to the size of the substrate to be coated.
Oxygen Plasma Cleaners
-
Oxygen Plasma Cleaners
300W/500W 5L Oxygen Plasma Cleaner NST-P5L-300W
5L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: n/a -
Oxygen Plasma Cleaners
1000W 10L Plasma Pleaner NST-P10L-1000W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.
SKU: n/a -
Oxygen Plasma Cleaners
300W / 500W 10L Oxygen Plasma Cleaner NST-P10L-300W/500W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: n/a -
Oxygen Plasma Cleaners
100W/150W 10L Plasma Cleaner NST-P10L-100W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: n/a -
Oxygen Plasma Cleaners
1000W 5L Plasma Cleaner NST-P5L-1000W
5L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: 854613298-1-1-1-1-1-2-1-2-1-1-1-1-1-1-1-1-1-1-1-1 -
Oxygen Plasma Cleaners
1000W 2L plasma cleaner NST-P2L-1000W
The plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.
SKU: n/a -
Oxygen Plasma Cleaners
300W/500W 2L plasma cleaning machine NST-P2L-500W
Plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.
SKU: n/a -
Oxygen Plasma Cleaners
NST-45mm rotary spray gun plasma cleaner
45mm rotary spray gun plasma cleaner can be processed online at high speed to improve production efficiency. The characteristics of the plasma are used to clean, activate and activate the surface of the solid material to be treated, thereby realizing the purpose of changing the surface microstructure, chemical properties and energy.
SKU: n/a
‘NST’ Lab Thin Film Coating Systems
-
Doctor-Blade Film Coaters & Screen Printing Coater
ZDF-III-LED composite vacuum gauge
Control load: AC220V/1A(DC28V/5A) senseless load.·Work power supply: AC220V±10%/50HZ·Power: about 40W at the maximum.
·Ambient temperature: 0～45℃·Relative humidity: <85%·See Appendix for the dimension and weight of the instrument.SKU: n/a -
Lab thin film Coating Systems, Magnetron Sputter coater
NST-300-1HD single target magnetron sputtering coater
Lab thin film Coating Systems, Magnetron Sputter coaterNST-300-1HD single target magnetron sputtering coater
Single target magnetron sputtering coater is equipped with a magnetron sputtering target with a water-cooled interlayer, a 140mm heatable rotating stage, and a DC power supply. The vacuum chamber adopts the top opening method, which makes it easier to change the target. It is an ideal device for making various metal films.
SKU: n/a -
Doctor-Blade Film Coaters & Screen Printing Coater
HFV-100 High Vacuum Pump Oil
- HFV-M Series high vacuum pump oil with the sophistication of deep, low aromatics and resin content.
- High viscosity index, high flash point, vacuum is not easy to fall at a higher temperature state.
- Not easy to emulsify when meetvapour,strong oil and water separation.
- Good oxidation stability, reduce grease and coke production, reducing the number of replacement oil pump.
SKU: n/a -
Plasma sputtering coater
Small Plasma Sputtering Coater NST-PSP180G-1TA
Small plasma sputtering coater is a cost-effective plasma sputter coating equipment independently developed by our company. It has the advantages of compact structure, easy to use, high integration and strong sense of design.
SKU: n/a -
Lab thin film Coating Systems
Dual-Target Magnetron Sputtering Coater NST-MSP300S-RFDC
Dual-target magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. There are 1-inch or 2-inch magnetron targets for you to choose. Customers can choose the target according to the size of the substrate to be coated
SKU: 854613298-1-1-1-1-1-2-1-2-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1
