Product Carousel Tabs
Vacuum arc Melting Furnace NST-AM180-V7X
This product is a small vacuum arc melting furnace with tungsten electrodes and water-cooled copper crucible. The equipment melting temperature can exceed 3000℃, and the temperature is reduced rapidly. The equipment adopts stainless steel water-cooled chamber and is equipped with a quartz observation window
Small vacuum induction furnace NST-IM315-S
This product is a small vacuum induction furnace with induction heating, and the melting temperature of the equipment can reach 2000℃. The induction furnace adopts a stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition.
Ultra high pressure cold isostatic press NST-500CIP-60MAF
Ultra high pressure cold isostatic press NST-500CIP-60MAF
The CY-500CIP-60MAF ultra-high pressure cold isostatic press is designed for the material research department of colleges and universities and scientific research institutes that need small pieces of analytical samples. It has the characteristics of small size, reliable operation and simple operation.
Ultra high pressure cold isostatic press NST-500CIP-30MAF
Ultra high pressure cold isostatic press NST-500CIP-30MAF
The ultra-high pressure cold isostatic press is to place the sample product in a closed container filled with liquid. After the power is applied, the pressure applied by the liquid on each surface of the sample is equal. In a high-pressure environment, the density of the sample product becomes large, the gap of the sample particles becomes smaller and the desired shape is obtained.
Ultra high pressure cold isostatic press NST-500CIP-50MAF
Ultra high pressure cold isostatic press NST-500CIP-50MAF
The CY-500CIP-50MAF ultra-high pressure cold isostatic press is designed for the material research department of colleges and universities and scientific research institutes that need small pieces of analytical samples. It has the characteristics of small size, reliable operation and simple operation.
Vacuum arc Melting Furnace NST-AM180-V7X
This product is a small vacuum arc melting furnace with tungsten electrodes and water-cooled copper crucible. The equipment melting temperature can exceed 3000℃, and the temperature is reduced rapidly. The equipment adopts stainless steel water-cooled chamber and is equipped with a quartz observation window
Small vacuum induction furnace NST-IM315-S
This product is a small vacuum induction furnace with induction heating, and the melting temperature of the equipment can reach 2000℃. The induction furnace adopts a stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition.
Ultra high pressure cold isostatic press NST-500CIP-60MAF
Ultra high pressure cold isostatic press NST-500CIP-60MAF
The CY-500CIP-60MAF ultra-high pressure cold isostatic press is designed for the material research department of colleges and universities and scientific research institutes that need small pieces of analytical samples. It has the characteristics of small size, reliable operation and simple operation.
Ultra high pressure cold isostatic press NST-500CIP-30MAF
Ultra high pressure cold isostatic press NST-500CIP-30MAF
The ultra-high pressure cold isostatic press is to place the sample product in a closed container filled with liquid. After the power is applied, the pressure applied by the liquid on each surface of the sample is equal. In a high-pressure environment, the density of the sample product becomes large, the gap of the sample particles becomes smaller and the desired shape is obtained.
Ultra high pressure cold isostatic press NST-500CIP-50MAF
Ultra high pressure cold isostatic press NST-500CIP-50MAF
The CY-500CIP-50MAF ultra-high pressure cold isostatic press is designed for the material research department of colleges and universities and scientific research institutes that need small pieces of analytical samples. It has the characteristics of small size, reliable operation and simple operation.
NST-HFV-K Series Diffusion Pump Oil
HFV-K series diffusion pump oil has a low ultimate pressure at work, high pumping speed and good oxidation resistance. Can be widely used in optics, electronics, vacuum metallurgy, vacuum coating and other aspects of the defense industry for metal diffusion pump and glass diffusion pump.
Professional Compact Turbo Pump Station (Oil Or Dry Backup Pump Optional)- NST-80
Professional Compact Turbo Pump Station (Oil Or Dry Backup Pump Optional)- NST-80
Pump station NST-80, Compact oil or dry backup pump optional
The turbo pumping station is a piece of clean high (ultrahigh) obtaining equipment, and it is a vacuum obtaining system mainly consists of a molecular pump and a mechanical pump according to vacuum knowledge and principle. The products in this Specification include FJ-80, turbo pumping station, with corresponding pumping speed of 62L/s. The pumping speeds of the backing oil pumps are 0.5L/s, and the pump speeds of the backing dry pumps are 0.2L. These products are widely applied to the fields of surface analysis, accelerator technology, plasma technology, research laboratories, electric vacuum device manufacturing and other vacuum areas.
Dual-Target Magnetron Sputtering Coater NST-MSP300S-RFDC
Dual-target magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. There are 1-inch or 2-inch magnetron targets for you to choose. Customers can choose the target according to the size of the substrate to be coated
Ultra high pressure cold isostatic press NST-500CIP-30MAF
Ultra high pressure cold isostatic press NST-500CIP-30MAF
The ultra-high pressure cold isostatic press is to place the sample product in a closed container filled with liquid. After the power is applied, the pressure applied by the liquid on each surface of the sample is equal. In a high-pressure environment, the density of the sample product becomes large, the gap of the sample particles becomes smaller and the desired shape is obtained.
NST-Compact UV-Ozone Cleaner
Compact UV-Ozone Cleaner is a compact Ultraviolet (UV) Ozone cleaner, which is used for cleaning all types crystal substrates to achieve better thin film quality at low cost. Also, it is an excellent tool to remove and strip photoresist, improve surface wettability, Clean SEM & TEM samples, UV polymer activation, assembly etc.
NST-3″ two zones CSS furnace for rapid thermal processing
NST-3″ two zones CSS furnace for rapid thermal processing
NST-3″ two zones CSS furnace is a two heating zone rapid thermal processing furnace with 11″ O.D quartz tube. It is designed for PVD or CSS (Close Spaced Sublimation) film coating up to 3″ diameter or 2″×2″ square.
10″ Programmable Precision Lapping/Polishing Machine NST-1000B
10″ Programmable Precision Lapping/Polishing Machine NST-1000B
NST-MP1000B can be used for lapping/polishing material samples, such as metal, crystal, glass, ceramic, refractory, rocks, PCB board and polymers, with size up to 10″ in diameter. Customer can adjust the pressing force between the 150 mm Dia. sample loading plate (top) and 250 mm Dia. polishing plate (bottom), as well as their respective rotary speed to meet the processing
ZDF-III-LED composite vacuum gauge
·Power: about 40W at the maximum.
High Vacuum Pump Direct Drive – NST Series
NST Pumps, a pioneer in rotary vane vacuum pump technology armed with decades of industrial experts, presents the NST series rotary vane pumps.
NST series pumps are an outcome of excessive design programme based on first hand principles and in-detailed analysis of each component thereby making it a world class product.
NST High Temperture 1500C Two Zone Rotary Tube Furnace
NST Custom Laboratory Compact Doctor Blade Coating Machine
NST Custom Laboratory Compact Doctor Blade Coating Machine
NST 200C Max. Automatic Film Coating Machine
NST 200C Max. Automatic Film Coating Machine
Computers & Laptops
Smartphones & Tablets
Trending products
See All Trending products
Ultra high pressure cold isostatic press NST-500CIP-60MAF
Ultra high pressure cold isostatic press NST-500CIP-60MAF
The CY-500CIP-60MAF ultra-high pressure cold isostatic press is designed for the material research department of colleges and universities and scientific research institutes that need small pieces of analytical samples. It has the characteristics of small size, reliable operation and simple operation.
KF-40 CENTERING RING with NBR O-RING
KF VACUUM FITTINGS AND FLANGES
KF vacuum fittings and flanges consist of two flanges coupled together by a centering ring with a O-ring and a clamp. With this kind of connection provides many advantages, such as easy and quick mounting, assembly without any tools, unlimited orientation and easy interchangeability.
The standard sizes for KF vacuum fittings and flanges are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50.
KF vacuum fittings and flanges are includes KF clamp, KF claw clamp, KF centering ring, KF o-ring, KF blank flange, KF bored weld flange, KF socket weld flange, KF half nipple, KF full nipple, KF reducing conical, KF elbows, KF tees, KF 4-way crosses, KF reducing tees, KF reducing 4-way crosses, KF flange to hose nozzle and so on.
NST-Compact UV-Ozone Cleaner
Compact UV-Ozone Cleaner is a compact Ultraviolet (UV) Ozone cleaner, which is used for cleaning all types crystal substrates to achieve better thin film quality at low cost. Also, it is an excellent tool to remove and strip photoresist, improve surface wettability, Clean SEM & TEM samples, UV polymer activation, assembly etc.
KF TEE
KF VACUUM FITTINGS AND FLANGES
KF vacuum fittings and flanges consist of two flanges coupled together by a centering ring with a O-ring and a clamp. With this kind of connection provides many advantages, such as easy and quick mounting, assembly without any tools, unlimited orientation and easy interchangeability.
The standard sizes for KF vacuum fittings and flanges are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50.
KF vacuum fittings and flanges are includes KF clamp, KF claw clamp, KF centering ring, KF o-ring, KF blank flange, KF bored weld flange, KF socket weld flange, KF half nipple, KF full nipple, KF reducing conical, KF elbows, KF tees, KF 4-way crosses, KF reducing tees, KF reducing 4-way crosses, KF flange to hose nozzle and so on.
NST Series Rotary Vane Pumps
‘NST’ Pumps are built to address the high vacuum needs of various industrial and scientific applications. The field proven pumps are often termed as a star performer in the point-of-use by most of our customers. These pumps are designed for low, medium and high vacuum applications.
NST Single Stage Oil Lubricate Vacuum Pump
NST series vacuum pumps are single stage, direct driven, oil-sealed and air cooled. A rotor with three vanes is positioned inside the pump cylinder supported by two bearings. The pumps have a built-in gas ballast valve and one of the simplest and most reliable oil recirculating system. The oil is pumped into the stator from the oil reservoir for lubrication, sealing and cooling.
NST 1400°C Max Controlled Atmosphere Muffle Furnace W/ PC Interface
NST 1400 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and SiC heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results. All our furnaces are CE compliant.
NST-10L 13.56MHz Plasma Cleaner
Featrues
1. Environmental technologies: plasma process is the role of gas – solid coherent reactor consumes no water resources, no need to add chemicals and no environmental pollution.
2. Wide adaptability: regardless of processing substrate type, such as metals, semiconductors.
