-
×
NST Two in one film coater: plasma sputter and carbon evaporating
1 × ₹1,052,640.00
Subtotal: ₹1,052,640.00
Product Carousel Tabs
Doctor-Blade Film Coaters & Screen Printing Coater
Zunhua Sash BOMB series Bias power supply
Bomb-IIIS series of Bias power supply works in high frequency conversion mode of Level 2，unipolar pulse output .Power supply voltage is adjusted by changing the voltage of the power supply of high frequency transformation circuit to realize, adjustable voltage circuit with1% stable rate.
SKU: n/a
Doctor-Blade Film Coaters & Screen Printing Coater
ZJ-54D Metal thermocouple vacuum gauge tube
This type of vacuum gauge adopted smaller thermal capacity nickel chromium – constantan as a heating wire and thermocouple wire with stabilizing treatment. With automatic enviroment temperature compensation and dust protection, has a simple structure, wide range, fast response, anti-pollution, anti-oxidation, small drift, long life, stable performance,reasonble price and so on. Especially for low vacuum measurement. This type of vacuum guage can be used with the ZJ-53 glass thermocouple regulated interchangeable.
SKU: n/a
Doctor-Blade Film Coaters & Screen Printing Coater
ZJ-27 thermal vacuum gauge tube for vacuum PVD machine/ZJ-27 CF35 /KF40 gauge tube
Doctor-Blade Film Coaters & Screen Printing Coater
ZJ-27 thermal vacuum gauge tube for vacuum PVD machine/ZJ-27 CF35 /KF40 gauge tube
This type of regulation is a typical transistor structure, adopts precious metal oxide cathode, with the features of antioxidant, instantaneous atmospheric impact resistant, stable performance, long life, suitable for medium and high vacuum measurements, etc.
SKU: n/a
Doctor-Blade Film Coaters & Screen Printing Coater
ZDF-III-LED composite vacuum gauge
Control load: AC220V/1A(DC28V/5A) senseless load.
·Work power supply: AC220V±10%/50HZ
·Power: about 40W at the maximum.
·Ambient temperature: 0～45℃
·Relative humidity: <85%
·See Appendix for the dimension and weight of the instrument.
SKU: n/a
Doctor-Blade Film Coaters & Screen Printing Coater
vacuum metalizng machine Magnetic valve
Holding pump Magnetic valve :size:115*115 mm suitable for 2X-30 rotary vane pump
Backing pump Magnetic valve: size:160mm * 140mm*140mm suitabel for 2X-70 rotary vane pump
Model: DN16;DN25;DN32.DN40;DN50;DN65;DN80;DN100
SKU: n/a
Muffle Furnaces (400 - 1900 C)
Vacuum arc Melting Furnace NST-AM180-V7X
This product is a small vacuum arc melting furnace with tungsten electrodes and water-cooled copper crucible. The equipment melting temperature can exceed 3000℃, and the temperature is reduced rapidly. The equipment adopts stainless steel water-cooled chamber and is equipped with a quartz observation window
SKU: n/a
Atmosphere Furnace
Small vacuum induction furnace NST-IM315-S
This product is a small vacuum induction furnace with induction heating, and the melting temperature of the equipment can reach 2000℃. The induction furnace adopts a stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition.
SKU: n/a
Lab Hydraulic Press, Lab Sample Preparation Equipment
Ultra high pressure cold isostatic press NST-500CIP-60MAF
Lab Hydraulic Press, Lab Sample Preparation Equipment
Ultra high pressure cold isostatic press NST-500CIP-60MAF
The CY-500CIP-60MAF ultra-high pressure cold isostatic press is designed for the material research department of colleges and universities and scientific research institutes that need small pieces of analytical samples. It has the characteristics of small size, reliable operation and simple operation.
SKU: n/a
Lab Hydraulic Press, Lab Sample Preparation Equipment
Ultra high pressure cold isostatic press NST-500CIP-30MAF
Lab Hydraulic Press, Lab Sample Preparation Equipment
Ultra high pressure cold isostatic press NST-500CIP-30MAF
The ultra-high pressure cold isostatic press is to place the sample product in a closed container filled with liquid. After the power is applied, the pressure applied by the liquid on each surface of the sample is equal. In a high-pressure environment, the density of the sample product becomes large, the gap of the sample particles becomes smaller and the desired shape is obtained.
SKU: n/a
Lab Hydraulic Press, Lab Sample Preparation Equipment
Ultra high pressure cold isostatic press NST-500CIP-50MAF
Lab Hydraulic Press, Lab Sample Preparation Equipment
Ultra high pressure cold isostatic press NST-500CIP-50MAF
The CY-500CIP-50MAF ultra-high pressure cold isostatic press is designed for the material research department of colleges and universities and scientific research institutes that need small pieces of analytical samples. It has the characteristics of small size, reliable operation and simple operation.
SKU: n/a
Doctor-Blade Film Coaters & Screen Printing Coater
NST-HFV-K Series Diffusion Pump Oil
HFV-K series diffusion pump oil has a low ultimate pressure at work, high pumping speed and good oxidation resistance. Can be widely used in optics, electronics, vacuum metallurgy, vacuum coating and other aspects of the defense industry for metal diffusion pump and glass diffusion pump.
SKU: n/a
Turbo Molecular Pump Station
Professional Compact Turbo Pump Station (Oil Or Dry Backup Pump Optional)- NST-80
Turbo Molecular Pump Station
Professional Compact Turbo Pump Station (Oil Or Dry Backup Pump Optional)- NST-80
Pump station NST-80, Compact oil or dry backup pump optional
The turbo pumping station is a piece of clean high (ultrahigh) obtaining equipment, and it is a vacuum obtaining system mainly consists of a molecular pump and a mechanical pump according to vacuum knowledge and principle. The products in this Specification include FJ-80, turbo pumping station, with corresponding pumping speed of 62L/s. The pumping speeds of the backing oil pumps are 0.5L/s, and the pump speeds of the backing dry pumps are 0.2L. These products are widely applied to the fields of surface analysis, accelerator technology, plasma technology, research laboratories, electric vacuum device manufacturing and other vacuum areas.
SKU: n/a
Oxygen Plasma Cleaners
300W/500W 5L Oxygen Plasma Cleaner NST-P5L-300W
5L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: n/a
Oxygen Plasma Cleaners
1000W 10L Plasma Pleaner NST-P10L-1000W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.
SKU: n/a
Oxygen Plasma Cleaners
300W / 500W 10L Oxygen Plasma Cleaner NST-P10L-300W/500W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: n/a
Oxygen Plasma Cleaners
100W/150W 10L Plasma Cleaner NST-P10L-100W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: n/a
Lab thin film Coating Systems
Dual-Target Magnetron Sputtering Coater NST-MSP300S-RFDC
Dual-target magnetron sputtering coater is a cost-effective magnetron sputtering coating equipment independently developed by our company. It is standardized, modular and customizable. There are 1-inch or 2-inch magnetron targets for you to choose. Customers can choose the target according to the size of the substrate to be coated
SKU: 854613298-1-1-1-1-1-2-1-2-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1-1
Oxygen Plasma Cleaners
NST-Ultra-low temperature atmospheric plasma cleaner
Ultra-low temperature atmospheric plasma cleaner utilizes the characteristics of plasma to clean, revitalite and activate the surface of solid materials that need to be treated, and the atmospheric plasma cleaner improves the surface adhesion, thereby achieving the purpose of changing the surface microstructure, chemical properties and energy.
SKU: n/a
Lab thin film Coating Systems, Magnetron Sputter coater
NST Single chamber magnetron sputtering system
Lab thin film Coating Systems, Magnetron Sputter coater
NST Single chamber magnetron sputtering system
Single chamber magnetron sputtering system is mainly composed of sputtering vacuum chamber, magnetron sputtering target, substrate water-cooled heating platform, working gas path, air extraction system, vacuum measurement, electronic control system and installation machine.
SKU: n/a
Lab Sample Preparation Equipment, Planetary Ball Mills
Cryogenic Planetary Ball Mill
Applications:Cryogenic planetary ball mill is mainly applied to ultrafine grinding under condition of low-temperature requested by materials. Compared with the artificial injection of liquid nitrogen cooling, cold-air planetary ball mill is much easier and more convenient to be operated, it is also cost-saved, and low-energy consumed.
SKU: n/a
Vacuum Fittings And Flanges
KF-40 FLANGE TO HOSE NOZZLE (16/20/25)
KF VACUUM FITTINGS AND FLANGES
KF vacuum fittings and flanges consist of two flanges coupled together by a centering ring with a O-ring and a clamp. With this kind of connection provides many advantages, such as easy and quick mounting, assembly without any tools, unlimited orientation and easy interchangeability.
The standard sizes for KF vacuum fittings and flanges are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50.
KF vacuum fittings and flanges are includes KF clamp, KF claw clamp, KF centering ring, KF o-ring, KF blank flange, KF bored weld flange, KF socket weld flange, KF half nipple, KF full nipple, KF reducing conical, KF elbows, KF tees, KF 4-way crosses, KF reducing tees, KF reducing 4-way crosses, KF flange to hose nozzle and so on.
SKU: n/a
Oxygen Plasma Cleaners
-
Oxygen Plasma Cleaners
300W/500W 5L Oxygen Plasma Cleaner NST-P5L-300W
5L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: n/a -
Oxygen Plasma Cleaners
1000W 10L Plasma Pleaner NST-P10L-1000W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.
SKU: n/a -
Oxygen Plasma Cleaners
300W / 500W 10L Oxygen Plasma Cleaner NST-P10L-300W/500W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: n/a -
Oxygen Plasma Cleaners
100W/150W 10L Plasma Cleaner NST-P10L-100W
10L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: n/a -
Oxygen Plasma Cleaners
1000W 5L Plasma Cleaner NST-P5L-1000W
5L plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned
SKU: 854613298-1-1-1-1-1-2-1-2-1-1-1-1-1-1-1-1-1-1-1-1 -
Oxygen Plasma Cleaners
1000W 2L plasma cleaner NST-P2L-1000W
The plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.
SKU: n/a -
Oxygen Plasma Cleaners
300W/500W 2L plasma cleaning machine NST-P2L-500W
Plasma cleaner is a compact, non-destructive cleaning device. The plasma cleaner uses low air pressure to excite plasma as a cleaning medium, thereby effectively avoiding secondary pollution caused by the liquid cleaning medium to the object to be cleaned.
SKU: n/a -
Oxygen Plasma Cleaners
NST-45mm rotary spray gun plasma cleaner
45mm rotary spray gun plasma cleaner can be processed online at high speed to improve production efficiency. The characteristics of the plasma are used to clean, activate and activate the surface of the solid material to be treated, thereby realizing the purpose of changing the surface microstructure, chemical properties and energy.
SKU: n/a
‘NST’ Lab Thin Film Coating Systems
-
Lab thin film Coating Systems, Magnetron Sputter coater
Compact powder NST coating system
Compact powder NST coating system consists of 2″ water cold magnetron sputtering head and vibration stage. The particles will jump on the vibration stage during coating and form a core-shell structure. The coater will be useful for preparing special powder for 3D printing and solid state electrolyte powders.
SKU: n/a -
Lab thin film Coating Systems, Magnetron Sputter coater
NST-3 Rotary Target Plasma Sputtering Coater with Substrate Heater
Lab thin film Coating Systems, Magnetron Sputter coaterNST-3 Rotary Target Plasma Sputtering Coater with Substrate Heater
NST 3 rotary target plasma sputtering coater is a compact three rotary target plasma sputtering coater with a touch screen digital controller, and a substrate heater capable of heating up to 500 °C. It can coat 1-3 types of metallic materials to sample with the diameter up to 50 mm.Three sputtering targets: gold, silver, copper are included for immediate use.
SKU: n/a -
Lab thin film Coating Systems, Thermal Evaporation Coater
NST Small high vacuum two-in-one film coater
Lab thin film Coating Systems, Thermal Evaporation CoaterNST Small high vacuum two-in-one film coater
The plasma sputtering and evaporating two-in-one film coater is equipped with DC sputtering target and thermal evaporation assembly, which can be used not only for plasma sputtering, but also obtain carbon or other metal simple films by evaporation.
SKU: n/a -
Doctor-Blade Film Coaters & Screen Printing Coater, Lab thin film Coating Systems
Battery Micrometer Adjustable Film Applicator – 100 Mm
Doctor-Blade Film Coaters & Screen Printing Coater, Lab thin film Coating SystemsBattery Micrometer Adjustable Film Applicator – 100 Mm
- Model Number:NST-100
- Dimension(L*W*H):100 mm standard width
- Net Weight:1kg
- Compliance:CE Certified
- Warranty:1 years limited warranty with lifetime technical s
- MOQ:1
- Payment:L/C D/A D/P T/T Western Union
- Delivery Time:7 day
SKU: n/a
